It's hard to tell in the picture, but I put a lace panel behind the glass, to give the illusion of looking out a window. Then I cut a 12" pine board to go over the space between the two cupboards and painted it the same color as my cupboards. I bought some eyehooks and s hooks (strong enough to hold some weight) at Home Depot, then spray painted them black. I screwed 2 eyehooks into the bottom of the board and 2 more into the top of the window at the same width. The s hook attaches the two.
Monday, October 31, 2011
A Room with a View (Sort of)
I needed something above the sink. It seemed like there should be a window there, but it would look into my garage, so no go. I love what people are doing with old antique windows lately, so when I saw an old 6 pane window at Confetti Antiques I grabbed it.

It's hard to tell in the picture, but I put a lace panel behind the glass, to give the illusion of looking out a window. Then I cut a 12" pine board to go over the space between the two cupboards and painted it the same color as my cupboards. I bought some eyehooks and s hooks (strong enough to hold some weight) at Home Depot, then spray painted them black. I screwed 2 eyehooks into the bottom of the board and 2 more into the top of the window at the same width. The s hook attaches the two.
It's hard to tell in the picture, but I put a lace panel behind the glass, to give the illusion of looking out a window. Then I cut a 12" pine board to go over the space between the two cupboards and painted it the same color as my cupboards. I bought some eyehooks and s hooks (strong enough to hold some weight) at Home Depot, then spray painted them black. I screwed 2 eyehooks into the bottom of the board and 2 more into the top of the window at the same width. The s hook attaches the two.
Sunday, October 30, 2011
Finishing the Bar
The previous post showed my half finished bar. Used a stock Home Depot cabinet, added side and back skins, painted and glazed to match my cupboards and added the matching hardware.
I had an old farm table like this kicking around and it just happened to be the perfect width for my new bar.

First I sanded it down, then cut it to the right length. Below is the sanded unfinished wood. Then I refinished it with a chestnut stain (sort of looked like a dark cherrywood)

It was perfect because of this nice beveled edge on both sides and the finished end. Below is the unfinished end that goes against the wall.
I had an old farm table like this kicking around and it just happened to be the perfect width for my new bar.
First I sanded it down, then cut it to the right length. Below is the sanded unfinished wood. Then I refinished it with a chestnut stain (sort of looked like a dark cherrywood)
It was perfect because of this nice beveled edge on both sides and the finished end. Below is the unfinished end that goes against the wall.
Sunday, September 25, 2011
More projects in progress
I decided to slow the pace just a bit, and spend a little more time enjoying my new home. I am still working on the house almost every day; But I'm determined to take a little time to play, read a book, visit family and friends. In fact, I enjoyed a great trip to St. George and saw the Little Mermaid at the Tuacahn theater with my friend, Marla. I highly recommend it. Also visited Pam's (our other BFF's) family on the way home.
I got the cupboard for the new bar installed but no top on it yet. Watch for those pics soon, it's almost done. Of course, I already bought cute barstools (yeah, cart before the horse, that's me)
Next project was on the exterior. Painted the shutters. This is the before. A green that had fadedto almost gray.
I got the cupboard for the new bar installed but no top on it yet. Watch for those pics soon, it's almost done. Of course, I already bought cute barstools (yeah, cart before the horse, that's me)
Next project was on the exterior. Painted the shutters. This is the before. A green that had fadedto almost gray.
This part was scary. I picked the color I wanted, but when I poured it out, it looked hot pink. For a minute I thought they had given me the wrong paint. I didn't dare touch the shutters with it, so I tried it on a piece of scrap cardboard, and sure enough it dried like I wanted it. I think the neighbors thought I was crazy slapping hot pink paint onto my house.

But I liked the final result. now I just need to do the front door before I can put on the new hardware.
Saturday, September 17, 2011
My car has a home!
Saturday, September 10, 2011
Fun past projects
Here's a couple of pre-house projects that I really enjoyed doing.
Playhouse for the niece and nephew.
Ikea hack storage/canopy bed

I needed more purse/shoe storage. Also the slide out drawer makes a great hideaway nightstand. I used the narrow pax wardrobe units from ikea, with the frosted glass front doors. Then attached two closet dowels at the top. And purchaed a lined drape from ikea. (no sewing ) Below is the picture from underneath the canopy showing the closet rods. (Don't know why it loads sideways, it's not that way on my computer)
Playhouse for the niece and nephew.
Freezer concealer
In my townhouse, the only place for my deep freeze was in the dining area. And that big white box, was just not very attractive.
So I purchased some sticky back vinyl floor tile and beadboard panel from the home depot and "upcycled" some scrap molding from the Restore. 
In my townhouse, the only place for my deep freeze was in the dining area. And that big white box, was just not very attractive.
Ikea hack storage/canopy bed
I needed more purse/shoe storage. Also the slide out drawer makes a great hideaway nightstand. I used the narrow pax wardrobe units from ikea, with the frosted glass front doors. Then attached two closet dowels at the top. And purchaed a lined drape from ikea. (no sewing ) Below is the picture from underneath the canopy showing the closet rods. (Don't know why it loads sideways, it's not that way on my computer)
Let there be light
I was not crazy about the exterior lights. These same lights were on both sides of the garage door and the front porch. I had originally planned on using my favorite black hammered rustoleum spray paint. Crazy work schedules and mild paranoia being hazards of my job; I really wanted dusk to dawn and/or motion lights. So I kept my eyes open for good deals on my many trips to various home improvement stores.

I found these dusk to dawn lights for $20 each at Home Depot. They even included the bright long lasting LED bulbs.
I found these dusk to dawn lights for $20 each at Home Depot. They even included the bright long lasting LED bulbs.
Tuesday, September 6, 2011
I have cupboard doors!!!
This is what the cupboards looked like when I bought the house. Not too bad, but pretty generic.
I used a laquer to paint the cupboards but still let the texture of the wood grain show through. Its the same buttermilk color as the trim in the kitchen and living room. My painter actually took my cabinet doors to his shop to spray them. It gives a much better finish. Unfortunately I did not get them back til moving day. So they sat in the garage for over a week while I attended to more pressing matters.
I used a chocolate brown glaze and wiped it on and back off. It grabbed on to the corners and the grooves in the wood grain. Here's a comparison of drawer fronts with and without the glaze.
And a close up of the finished product.
At last! Cupboard doors attached with new knobs. It feels much more like a home and less like a construction zone. Of course, I will never leave well enough alone, eventually they will get crown molding. (As soon as I finish a couple of higher priority projects)
Forgot to take a picture of the drawers but they have the cup pulls like these.


Sunday, August 21, 2011
Floors Finished Just in Time
Here's a close up picture of my wood floor sample, along with my paint samples. The yellow was going to be for the kitchen, but I didn't end up liking it when it got on the wall. The burgundy will be for the front door and shutters some time in the near future.
Here is the completed floor. The picture doesn't do it justice. It's gorgeous! I did NOT do this myself. I found someone very capable and very reasonably priced to do it for me. I got a good deal on the flooring, but it's still a fair amount of money to "experiment" with myself. Not to mention, there's no way I could have had it completed in the time I had allotted.
Tuesday, August 16, 2011
Meanwhile
While (literally) waiting for paint to dry, I worked on a couple of side projects.
First of all, ugly gold doorknobs.
My sister tried this a few years ago, and hers still look good in a household of 6, so no worries here.First I took the shine off of them with steel wool.
This styrofoam block came in very handy to hold the knobs while I sprayed them. I used Rustoleum Hammered Black Paint.
My sister tried this a few years ago, and hers still look good in a household of 6, so no worries here.First I took the shine off of them with steel wool.
This styrofoam block came in very handy to hold the knobs while I sprayed them. I used Rustoleum Hammered Black Paint.
Now comes the fun part!
Took a couple of days of spraying because they did everything, floor to ceiling, including up into the floor joists and exposed framing in the basement.
Then they sprayed the all the doors, trim and ceilings in a color I would call buttermilk, I forget what the real name is.
Then with the help of some friends we painted the walls a color called whispering wheat. Hard to really see on the iphone photo, but you can tell the contrast between that and the buttermilk.
Friday, August 5, 2011
................STILL CLEANING
Day 9 of renovation and I'm still cleaning. Arrgh!
I occassionally take out my frustrations on my kitchen subloor (almost finished)
When I looked at my timeline and progress so far, the painting question got a whole lot easier.
I occassionally take out my frustrations on my kitchen subloor (almost finished)

When I looked at my timeline and progress so far, the painting question got a whole lot easier.
The answer??...........Let someone else spray. I feel like I am wimping out a little. But I also need a place to live come September. 



So Ricardo will spray the whole house (including the exposed floor joists in the basement) and then do the bedroom and the halls in a creamy off white. Then I will roll just the living room and the kitchen in the coordinating colors.
The biggest project today was prepping for them to paint in the basement. 10 years is a long time to collect dust. Dust bunnies don't normally scare me, but these were another story. Have you seen the rabbit from the Holy Grail???
Tuesday, August 2, 2011
My solution to the health care crisis
Other than the smokey walls, the house was relatively clean when I bought it.
Then we opened the freezer........ Apparently someone left a box of popsicles in there. Then the power got shut off and they melted. One year later, this is the result. ->>>>>>
Thank you, thank you to my sister who spent a good 2 hours cleaning and disinfecting.
Jelly beans frozen, melted and frozen again.
Kind of like a giant Willie Wonka everlasting gobstopper. Every possible flavor rolled into one.
That's how I roll
To roll or not to roll is question for the day. Almost done scrubbing, and then it's prime time.
Going to use Kilz original oil based primer or the Kilz complete, or maybe the Kilz odorless.
So do I rent a sprayer and spray it on?
Might save some time, but I keep reading that paint has to be thinned to be sprayed, and Kilz recommends not thinning for best coverage. And I need GOOD coverage. And by the time I get it rented and assembled and cleaned out, could I have it half way rolled??
Open to suggestions. Anyone?? Anyone???
Monday, August 1, 2011
This is where it gets a little more complicated.
So I decided instead of doing carpeting in the whole house I would do laminate in the living room, kitchen and hall. Cost is about the same and I had a friend who offered to help me. I started pouring over laminate samples. Turns out the stuff that costs about the same as carpet isn't near as pretty as I'd hoped. Then I started looking at vinyl plank flooring. (it really is pretty cool) http://www.mannington.com/Residential/Adura/Search.aspx?FilterCollections=2 But then realized for the same price as that I could do engineered wood floors (Yippee!) Budget has expanded a wee bit now, but we're talking wood floors!!!!! 
Nice of my son to time his visit home so well.
If I could only get my hands on the guy that went crazy with the staple gun on this floor..... I would probably do nothing, because my hands are too sore from pulling out the staples.
Lucky for me, my friend took pity on me, and brought along her son. I would be pulling out staples on all my days off and possibly after I retire.

How fun! How exciting! How much prep work??
Turns out the existing vinyl floor in the kitchen is mounted on subfloor which is higher than the living room and will need to be removed. Ok, Demo time.

This would be my amazing brother-in-law, who with the help of my son ripped out about two-thirds of my kitchen floor. (I'm still working on the last third) After tearing out all my existing carpet and hauling it to the dump.
Nice of my son to time his visit home so well.
Sunday, July 31, 2011
In the beginning
Like I said, the house is in pretty good shape.
But it had been smoked in. A lot!

You can see where the walls had once been white where the 3 pictures were hanging.
Nothing a little paint and new carpet can't fix.
That and a lot of scrubbing. I did an internet search for how to clean nicotine stains from walls. Several suggestions, tsp, greased lightning, scrubbing bubbles.
I tried them all. And the winner is..... Scrubbing bubbles!! That stuff was amazing.
But it had been smoked in. A lot!
You can see where the walls had once been white where the 3 pictures were hanging.
Nothing a little paint and new carpet can't fix.
That and a lot of scrubbing. I did an internet search for how to clean nicotine stains from walls. Several suggestions, tsp, greased lightning, scrubbing bubbles.
I tried them all. And the winner is..... Scrubbing bubbles!! That stuff was amazing.

Subscribe to:
Posts (Atom)

